DYNATORQUE^TM Ground Level Position Indicators have been designed to monitor the rotational movement normally associated with the input shaft of a worm, bevel, or spur-geared actuator. This product is not applicable for rising stem valves or for valves with extension stem requirements in excess of 1.250” in diameter. Does not include valve box or valve box cover.

Indicator base plates are cast aluminum, traveling nut shafts, input shafts, and indicator arrows are brass. Input drive gears and traveling nuts are Delrin. Change gears are brass (bevel gears for 58 turns and below) or brass and steel (worm gear sets-all turns 59 and above). Window is Lexan. Main shaft bushings are sintered bronze, and all other bushings are Nylon. Sealed indicators include aluminum housing enclosure, carbon steel shafts and snap rings, buna-N seals.

  
  

Non-Sealed GPI Series									Sealed GPI-S Series
Model			Weight Lbs.			Turn Range			Model			Weight Lbs.			Turn Range
GPI 19			11			1-19			GPI-S19			24			1-19
GPI 38			11			20-38			GPI-S38			24			20-38
GPI 58			11			39-58			GPI-S58			24			39-58
GPI 98			11			59-98			GPI-S98			24			59-98
GPI 148			11			99-148			GPI-S148			24			99-148
GPI 198			11			149-198			GPI-S198			24			149-198
GPI 298			11			199-298			GPI-S298			24			199-298
GPI 398			11			299-398			GPI-S398			24			299-398
GPI 498			11			399-498			GPI-S498			24			399-498
GPI 598			11			499-598			GPI-S598			24			499-598
GPI 938			11			599-938			GPI-S938			24			599-938
Position Indicators up to 30,000 turns available in either GPI/GPIS series